4 Dirty Little Secrets About Car Key Cover Fiat 500 Industry Car Key Cover Fiat 500 Industry

Fiat 500 Key Fob Replacement

If your 500 keyfob ceases functioning, try another to test if it will be detected by your car. If it does, then the issue is likely with the original fob's battery, or water damage.

First replace the battery. Make sure the new # CR2032 coin battery is inserted correctly, with the "+" side facing down inside the fob.

Dead Battery

The majority of the time, when a fob won't work, it's because the battery is dead. This isn't a problem to repair and most fobs give you a warning when the battery is depleted. You can find the correct procedure on YouTube for nearly every key fob on your vehicle or in the owner's manual. You can also change it by taking it to an expert locksmith or the dealer who gave it to you.

Other times, a device can stop working and there may be a problem with the circuit board inside. It's not common however, it can occur. The internal chip may be damaged in the event you drop the fob on something hard. It could also happen if you are using an aftermarket fob, and the key doesn't work. In this scenario you'll need to go to a dealer or a locksmith and have it reconfigured to work with your 500.

One 2012 FIAT FIAT 500 flip key remote - resembles Ilco with lock, unlock, and trunk buttons – new replacement keyless entry (will require cutting and program by a locksmith).

Damaged Chip

Fiat 500 key fobs are wireless devices that transmit signals to the car every time you press the button. It has a microchip containing information about the code needed to connect with your car. If the chip is damaged, it can't send the correct code, and the car will not start. It is possible to repair this kind of damage and a locksmith can help. United Locksmith can complete this repair on both classic and modern models, so don't be afraid to contact us.

You can purchase a new fob and have it programmed professionally by a locksmith. It's less expensive to do this than going to a dealer and it performs the same. A locksmith will need some specific details from you, like the year in which your vehicle was built and the model's name.

Rub the chip with an old dollar bill if you're not sure what to do. The copper in the bill is abrasive, and will remove dirt and oxidation. However, it will not harm the microchip. If the chip is physically damaged, however, it may not be in a position to be repaired. This could happen if lose it, drive it over by your vehicle or experience any other kind of physical force.

Water Damage

Whether you accidentally dropped your keys in the pool, threw them in your bag while swimming at the beach, or splashed them with water on a wet day it's likely your fob will suffer from water damage. Even if you only have the smallest amount of water on the key, it could cause serious problems to its electronics.

You can usually fix this problem yourself by taking the fob out and cleaning it using a paper towel. After the fob is dry it is possible to replace its battery. It should then start functioning normally.

You can also take the fob to a local locksmith shop or auto shop to have it professionally cleaned and programmed. They can employ special equipment to ensure that the key fob functions with your car's computers.

If your Fiat 500's main fob stops working, it can be a stressful and frustrating. You may be tempted to go to the dealer to get your key fob replaced however this could be expensive and difficult to arrange. A locksmith can replace your key fob without having to visit an establishment. They are a better choice than a dealer because they can handle all aspects of your car's key fob replacement without the need for a dealership visit.

Pairing Issues

If you drop your keyfob, or it ceases to function, and nothing else appears to be wrong, it could be the chip. This could be due water damage or a dead battery. it could be that it needs reprogramming.

Often times this can be accomplished by following the steps in the owner's manual. However it's recommended to hire an automotive locksmith perform this procedure if you're having problems or if the directions in the manual don't work for you. This will ensure that the chip won't be fried and will likely be the cheapest solution.

A number of owners have reported that their keys won't allow them to lock their cars. This could be a problem when you want to fill up at gas stations. Some owners have reported that the locking system on their 500 has failed and they've needed to replace the entire intermediate steering shaft.  fiat 500 key replacement  has even mentioned this problem in an technical bulletin (TSB).

If you're having trouble with your Fiat, an experienced locksmith can assist. They're able to duplicate the key you have or make you an entirely new one that can lock and start the car. They're able to accomplish this without having to see your old key and are usually less expensive than buying it from the dealership.